nixos-config/murex.nix

{ config, pkgs, ... }:

{
  imports = [
    ./basic-tools.nix
  ];

  boot.loader.grub.enable = false;

  boot.loader.raspberryPi = {
    enable = true;
    version = 3;
    uboot.enable = true;
  };

  # boot.kernelPackages = pkgs.linuxPackages_latest;
  # boot.kernelPackages = pkgs.linuxPackages_4_18;
  # boot.kernelPackages = pkgs.linuxPackages_latest;
  boot.kernelPackages = pkgs.linuxPackages_rpi;

  boot.kernelParams = [
    "cma=32M" # for virtual console, see https://nixos.wiki/wiki/NixOS_on_ARM
    "console=tty0"
  ];

  hardware.enableRedistributableFirmware = true;
  # hardware.firmware = with pkgs; [
  #   (stdenv.mkDerivation {
  #     name = "broadcom-rpi3bplus-extra";
  #     src = fetchurl {
  #       url = "https://raw.githubusercontent.com/RPi-Distro/firmware-nonfree/b518de4/brcm/brcmfmac43455-sdio.txt";
  #       sha256 = "0r4bvwkm3fx60bbpwd83zbjganjnffiq1jkaj0h20bwdj9ysawg9";
  #     };
  #     phases = [ "installPhase" ];
  #     installPhase = ''
  #       mkdir -p $out/lib/firmware/brcm
  #       cp $src $out/lib/firmware/brcm/brcmfmac43455-sdio.txt
  #     '';
  #   })
  # ];
  # networking.wireless.enable = true;
  # networking.networkmanager.enable = true;
  # networking.wireless.iwd.enable = true;

  fileSystems = {
    # "/boot" = {
    #   device = "/dev/disk/by-label/NIXOS_BOOT";
    #   fsType = "vfat";
    # };
    "/" = {
      device = "/dev/disk/by-label/NIXOS_SD";
      fsType = "ext4";
    };
  };

  networking.hostName = "murex";
  #networking.hostId = "34a820f1";

  time.timeZone = "Europe/Vienna";

  environment.systemPackages = with pkgs; [
    raspberrypi-tools
  ];

  users.extraUsers.gebner = {
    isNormalUser = true;
    extraGroups = [ "wheel" "networkmanager" "audio" "dialout" ];
    shell = pkgs.fish;
    # password = if config.virtualisation != null then "" else null;
  };

  services.openssh = {
    enable = true;
    passwordAuthentication = false;
  };

  documentation.nixos.enable = false;

  services.octoprint = {
    enable = true;
    plugins = plugins: with pkgs; with python2Packages;
    let rpi-gpio = buildPythonPackage rec {
      pname = "RPi.GPIO";
      version = "0.6.5";
      src = fetchPypi {
        inherit pname version;
        sha256 = "a4210ad63bfe844e43995286de0d3950dfacfa0f3799bb9392770ac54a7d2e47";
      };
    }; in
    [
      # bundles binary which is not built for aarch64 :-(
      # (buildPythonPackage rec {
      #   pname = "OctoPrint-PrintTimeGenius";
      #   version = "1.3";
      #   src = fetchFromGitHub {
      #     owner = "eyal0";
      #     repo = pname;
      #     rev = version;
      #     sha256 = "1jfiih8vpd1x5yk2yq9sgi0rbjh2ipasj39vs2dmfm3va2fhy75l";
      #   };
      #   propagatedBuildInputs = [ octoprint ];
      # })
      (buildPythonPackage rec {
        pname = "OctoPrint-TouchUI";
        version = "0.3.13";
        src = fetchFromGitHub {
          owner = "BillyBlaze";
          repo = pname;
          rev = version;
          sha256 = "0qk12ysabdzy6cna3l4f8v3qcnppppwxxsjx2i0xn1nd0cv6yzwh";
        };
        propagatedBuildInputs = [ octoprint ];
      })
      (buildPythonPackage rec {
        pname = "OctoPrint-Cost";
        version = "master";
        src = fetchFromGitHub {
          owner = "jasiek";
          repo = pname;
          rev = "d1dc75aa64df332d54a237864a116c63cb9e6cf5";
          sha256 = "0xkz1ygb5jspl1iy841lrv3fwm92ay09m6rw9g4vchwldqbgpjf3";
        };
        propagatedBuildInputs = [ octoprint ];
      })
      (buildPythonPackage rec {
        pname = "OctoPrint-PSUControl";
        version = "0.1.8";
        src = fetchFromGitHub {
          owner = "kantlivelong";
          repo = pname;
          rev = version;
          sha256 = "0aj38d7b7d5pzmzq841pip18cpg18wy2vrxq2nd13875597y54b8";
        };
        propagatedBuildInputs = [ octoprint rpi-gpio ];
      })
    ];
  };
  systemd.services.setupGpioForRelais = rec {
    wantedBy = [ "octoprint.service" ];
    serviceConfig = {
      Type = "oneshot";
      RemainAfterExit = "yes";
    };
    script = ''
      if echo 17 > /sys/class/gpio/export; then
        echo high > /sys/class/gpio/gpio17/direction
      fi
      chgrp dialout /sys/class/gpio/gpio17/value
    '';
  };
  users.users.${config.services.octoprint.user}.extraGroups = [
    "dialout" # ttyUSB access
  ];

  services.mjpg-streamer.enable = true;

  networking.firewall = {
    enable = true;
    allowedTCPPorts = [
      # config.services.octoprint.port
      # 5050 # mjpg-streamer
      80
    ];
  };

  services.nginx = {
    enable = true;
    recommendedTlsSettings = true;
    recommendedOptimisation = true;
    recommendedGzipSettings = true;
    recommendedProxySettings = true;

    virtualHosts."murex.mtlaa.gebner.org" = {
      locations."/" = {
        proxyPass = "http://localhost:${toString config.services.octoprint.port}";
        proxyWebsockets = true;
      };
      locations."/webcam/".proxyPass = "http://localhost:5050/?action=stream";
      locations."/webcampic/".proxyPass = "http://localhost:5050/?action=static";
    };
  };

  system.stateVersion = "19.03";
}